Open to the Outdoors

Please note: Due to ongoing product development, Therma-Tru Corp. reserves the right to make changes in design, materials and specifications without notice. can be seen collecting on glass surfaces, such as doorlites. Energy-efficient glass units in Therma-Tru door systems are constructed to keep the glass as warm as possible, reducing condensation build-up. However, there is no such thing as a condensation-free window or doorlite in high-humidity conditions. NOTE: Glass privacy ratings are determined by the 1/2-lite glass size. As a result, the amount of privacy / glass transparency may be more or less than indicated by the privacy rating, based on the glass design and size of the glass that is inserted into the door, sidelite or transom. Glass designs may differ from depiction due to the size and hand craftsmanship of glass. See your Therma-Tru seller or visit www.thermatru.com for more details. Components Adjustable Security Strike Plate – Proprietary adjustable type, permitting in-out adjustment of door in frame, up to 3/16". Hinges – Minimum hinge size 4" x 4" x .098". Ball-bearing hinges are recommended for 8'0" doors, doors using heavy lites (e.g., wrought iron), all 20-Minute Fire-rated fiberglass doors, Impact-rated doors and glass, and all Classic Craft doors. Use of the multi-point locking system is highly recommended for 8'0" and double fiberglass doors. Not recommended for steel doors. Limited Warranties Please be aware of the applicable Therma-Tru Limited Warranty which contains important restrictions, disclaimers, exclusions and conditions, as well as the below listed Installation, Finishing & Maintenance documents, related to the Therma-Tru product purchased (e.g., Fiberglass, Steel, Patio Door Systems), all of which can be obtained from your Therma-Tru seller or found in their entirety at www.thermatru.com : • Therma-Tru ® Fiberglass and Steel Door Systems Residential Limited Warranty: Fiberglass – Classic Craft ® , Fiber-Classic ® , Smooth-Star ® and Pulse ® Door Systems; Steel – Pulse ® , Profiles TM , Traditions and Therma-Tru ® Fire Door (TR 12-24) Steel Edge Door Systems • EnLiten TM Flush-Glazed Construction & Installation Rider to Fiberglass Door Systems Limited Warranty Independent Laboratory Performance Testing At the time of manufacture, Therma-Tru exterior door systems (properly assembled with all genuine Therma-Tru components) have been tested under one or more of the following performance specifications: structural load, uniform load deflection, vertical load resistance, air infiltration, water penetration resistance, forced entry resistance, operating forces, force to latch, deglazing resistance, operating cycle performance, impact resistance, sound transmission, thermal performance and solar heat gain performance. Therma-Tru exterior door systems conform to the applicable Performance Standards / Test Methods that may include ANSI/ AAMA/NWWDA 101/I.S.2, AAMA/ WDMA 101/I.S.2/NAFS, AAMA/WDMA/ CSA 101/I.S.2-A440, ASTM E330, ASTM E547, ASTM E283, ASTM E331, ANSI/BHMA A156.2, AAMA 1304, AAMA 920, AAMA 925, ASTM E2068, ASTM F842, ASTM E987, ASTM E1300, ASTM E90, ASTM E413, ASTM E1332, ASTM E1886, ASTM E1996, PA/TAS 201, PA/TAS 202, PA/TAS 203, HUD UM89, AAMA 1702.2, 24 CFR 3280, 24 CFR 3282, NFRC 100 and NFRC 200. Refer to www.thermatru.com for design pressure and other performance ratings. Doors Recommended Door Overhang – For best performance, all doors should be protected by an overhang. The recommended size is half the distance from the base of the door to the bottom of the overhang. So, as an example, a distance of 10' for this dimension would require an overhang of 5' minimum. For wetter climates, southern or western exposures, and for double doors, the overhang should be the same as the distance from the base of the door to the bottom of the overhang. In this same example, the dimension is 10' so the overhang should be 10'. For best performance, double doors to be used in areas with severe weather exposure must be installed using entry alcoves or large soffit overhangs to protect entry unit from exposure. Multi-point locking systems are highly recommended for 8'0" and double door applications. Doorlites Doorlites are insulated, and exposed panes are tempered or laminated. Optional wood grilles available for clear doorlites and transoms. Condensation occurs naturally in the home, caused by excessive humidity in the air. Often this harmless water vapor Therma-Tru ® Door Systems for Residential and Multi-Resident Premises: Classic Craft ® , Fiber-Classic ® and Smooth-Star ® Flush-Glazed Fiberglass Door Systems • EnLiten TM Flush-Glazed Homeowner Rider to Fiberglass Door Systems Limited Warranty for Residential and Multi-Resident Premises: Classic Craft ® , Fiber-Classic ® and Smooth-Star ® Flush-Glazed Fiberglass Door Systems • PrismaGuard ® Limited Warranty Rider to Fiberglass and Steel Door Systems Limited Warranty for Residential and Multi-Resident Premises: Fiberglass – Classic Craft ® , Fiber-Classic ® , Smooth-Star ® , and Pulse ® Door Systems; Steel – Pulse ® , Profiles TM and Traditions • Therma-Tru ® Composite Door Frame featuring Tru-Guard TM Composite Technology Limited Warranty for Residential and Multi-Resident Premises: Classic Craft ® , Fiber-Classic ® , Smooth-Star ® and Pulse ® Fiberglass Door Systems • Therma-Tru ® Composite Door Frame featuring Tru-Guard TM Composite Technology Limited Warranty Transferable Rider to Fiberglass Door Systems Limited Warranty for Residential and Multi-Resident Premises: Classic Craft ® , Fiber-Classic ® , Smooth-Star ® and Pulse ® Fiberglass Door Systems • Therma-Tru ® Retractable Screen Limited Warranty for Residential and Multi-Resident Premises Installation, Finishing & Maintenance Installation, finishing and maintenance must be performed according to Therma-Tru’s recommendations to comply with warranty requirements. Obtain a copy of the following documents outlining recommendations from your Therma-Tru seller or find them in their entirety at www.thermatru.com: • Installation Instructions (Products that are approved for Coastal and / or high wind applications may require special installation. Always follow the installation instructions in the Product Approval for these products.) • Therma-Tru Fiberglass and Steel Door Systems Recommendations for Proper Finishing and Painting or Staining NOTE: Finish colors may vary from an actual application due to fluctuations in finishing or the printing of this catalog. See your Therma-Tru seller or visit www.thermatru.com for more details. 42